Jotamastic 80 is a two-pack epoxy mastic paint, which can be applied at low film thicknesses. Jotamastic 80 is recommended as an anti-corrosive coating for steel above and below water. The aluminium or aluminium red-toned colour should be used below the waterline. Jotamastic 80 is very surface tolerant, so it can be used with good results in areas where high standards of preparation are
Jotun Jotamastic 87 Aluminium WG PromainJotamastic 87 Aluminium Winter Grade can be used as a primer, mid or finish coat, or as a single coat system in atmospheric and immersed environments. Jotamastic 87 Aluminium Winter Grade can be applied at sub zero surface temperatures and is suitable for the maintenance and repair of prepared carbon steel and aged surfaces.
Technical Data JOTAMASTIC 87 ALUMINIUM Product description Jotamastic 87 Aluminium is a two-pack surface-tolerant, abrasion resistant, high solids epoxy-based coating, for use in cases where optimum pretreatment is not feasible. It may be applied in high film thickness. Two hardeners (comp.B) are available, according to temperature conditions.
Technical Data Jotamastic 87 AluminiumJotamastic 87 Aluminium Page 1 of 5 Technical Data Jotamastic 87 Aluminium Product description A two component surface tolerant, abrasion resistant, high solids polyamine cured epoxy mastic coating which may be applied in high film thickness. Available with different hardeners for varying substrate temperatures, Standard (Std) and Wintergrade (WG).
Technical Data Sheet - Antifouling AccessoriesTechnical Data Sheet Jotamastic 87 GF Storage The product must be stored in accordance with national regulations. Keep the containers in a dry, cool, well ventilated space and away from sources of heat and ignition. Containers must be kept tightly closed. Handle with care. Shelf life at 23 °C 48 48 Jotamastic 87 GF Comp A Jotamastic 87
Technical Data Sheet Jotamastic 90 Aluminium VOC-US/Hong Kong US EPA method 24 (tested) (CARB(SCM)2007, SCAQMD rule 1113, Hong Kong) The provided data is typical for factory produced products, subject to slight variation depending on color.
Technical Data Sheet - JotunTechnical Data Sheet Jotamastic 90 Product description (87) NORSOK System 1, Rev.5 Grain, Newcastle Occupational Health Jotamastic 90 Aluminium Jotamastic 90 GF General:Primarily designed for maintenance and repair. Marine:Outside hulls, exterior and interior areas.
Technical Data Sheet Application Guide - Centro Ricambi Jotamastic 87 Metal finishing For areas in corrosivity category C1 to C4 (ISO 12944-2) all irregularities, burrs, slivers, slag and spatter on Technical Data Sheet (TDS) and Safety Data Sheet (SDS) for all the products used as part of the coating system. For your nearest local Jotun office, please visit our website at jotun
Jotamastic 87 Aluminium Product description This is a two component polyamine cured epoxy mastic coating. It is a surface tolerant, high solids, high build product. It is aluminium pigmented for improved barrier effect. Specially designed for areas where optimum surface preparation is not possible or desired.
Technical Data Sheet Application Guide Jotamastic 90 Jotamastic 90 Aluminium Product description (WBT), and/or to IMO MSC.288 (87) for Cargo Oil Tanks of Crude Oil Tankers (COT) reference is made to the PSPC Appendix in this document. The Application Guide (AG) must be read in conjunction with the relevant specification, Technical Data Sheet (TDS) and Safety Data Sheet (SDS) for all the
Technical Data Sheet Jotamastic 80Jotamastic 80 Wintergrade Comp B 4 5 (litres) Jotamastic 80 STD Comp B 2.3 Jotamastic 80 Comp A 16 20 3 Volume (litres) Date of issue:7 November 2016 Page:4/5 This Technical Data Sheet supersedes those previously issued. The Technical Data Sheet (TDS) is recommended to be read in conjunction with the Safety Data Sheet (SDS) and the
Technical Data Sheet Jotamastic 87 Aluminium Product description This is a two component polyamine cured epoxy mastic coating. It is a surface tolerant, high solids, high build product. It is aluminum pigmented for improved barrier effect. Specially designed for areas where optimum surface preparation is not possible or required.